Jacking Equipment
Machinery Jack

Machinery Jack TB Series Product Information
Hampshire Lifting Gear can offer the TB Series of machinery jacks where you can lift from the top or toe of the jack. This kind of jack is ideal for the raising of machinery to allow it to be placed on to machinery moving skates.
Capacity on Top: 10 tonne
Capacity on Toe: 6 tonne
Lifting Range on Top: 320mm - 580mm
Lifting Range of Toe: 35mm - 195mm
Hampshire Lifting Gear can offer the TB Series of machinery jacks where you can lift from the top or toe of the jack. This kind of jack is ideal for the raising of machinery to allow it to be placed on to machinery moving skates.
Capacity on Top: 10 tonne
Capacity on Toe: 6 tonne
Lifting Range on Top: 320mm - 580mm
Lifting Range of Toe: 35mm - 195mm
Hydraulic Jacks

Hydraulic Jacks HM Series Product Information
The HM Series of hydraulic jacks can be used for repairs, maintenance and installation of heavy machinery. They have a compact and stable construction which means they can be used in any position. The housing revolves around 360 degrees to allow positioning of the jack. Lowering speed can be accurately adjusted and they are fitted with overload protection. The pump lever is removable. The HM Series of jacks are available in a 5, 10 and 25 tonne capacity range.
Cautions: To avoid possible personal injury or damage to equipment.
Do not exceed the maximum load of the jack.
Do not add additional load to a lifted load.
Do not use in unstable or hazardous positions.
Unit must be used on flat surfaces able to carry the load.
The load must be stable when lifted.
An unstable load may cause the jack or load to slip.
Do not use jack(s) if damaged, altered or in poor conditions.
The HM Series of hydraulic jacks can be used for repairs, maintenance and installation of heavy machinery. They have a compact and stable construction which means they can be used in any position. The housing revolves around 360 degrees to allow positioning of the jack. Lowering speed can be accurately adjusted and they are fitted with overload protection. The pump lever is removable. The HM Series of jacks are available in a 5, 10 and 25 tonne capacity range.
Cautions: To avoid possible personal injury or damage to equipment.
Do not exceed the maximum load of the jack.
Do not add additional load to a lifted load.
Do not use in unstable or hazardous positions.
Unit must be used on flat surfaces able to carry the load.
The load must be stable when lifted.
An unstable load may cause the jack or load to slip.
Do not use jack(s) if damaged, altered or in poor conditions.
Mechanical Jacks - DIN 7355

Mechanical Jack HVS Series Product Information
The HVS Series of steel jacks are developed in accordance with the latest safety regulations with milled rack, gear wheels and tempered driving gear parts. They are suitable for lifting loads of any type and can lift either with the fixed toe or on the clawed head. The mechanical jack has a safety crank with folding handle which provides low expenditure of force through the optimal ratio.
Four types are available:
Type SWL Height of Jack Lifting Height Low Position of Claw
HVS-1.5 1500kg 725mm 350mm 70mm
HVS-3 3000kg 725mm 350mm 75mm
HVS-5 5000kg 725mm 300mm 70mm
HVS-10 10000kg 800mm 300mm 90mm
The HVS Series of steel jacks are developed in accordance with the latest safety regulations with milled rack, gear wheels and tempered driving gear parts. They are suitable for lifting loads of any type and can lift either with the fixed toe or on the clawed head. The mechanical jack has a safety crank with folding handle which provides low expenditure of force through the optimal ratio.
Four types are available:
Type SWL Height of Jack Lifting Height Low Position of Claw
HVS-1.5 1500kg 725mm 350mm 70mm
HVS-3 3000kg 725mm 350mm 75mm
HVS-5 5000kg 725mm 300mm 70mm
HVS-10 10000kg 800mm 300mm 90mm
Foldable Shop Crane to CE Standards

Foldable Shop Crane SC Series Product Information
The SC Series Crane has the unique technology of quick lifting with its' double action pump. It has larger capacities than normal shop cranes at three variable positions. The foldable shop crane conforms to CE standards and all are 125% overload tested before delivery. They are fitted with a relief valve to prevent overload.
There are three types with the following capaities:
Model Capacity at Position (kg)
P1 P2 P3
SC500 500 425 350
SC1000 1000 800 700
SC2000 2000 1700 1500
The SC Series Crane has the unique technology of quick lifting with its' double action pump. It has larger capacities than normal shop cranes at three variable positions. The foldable shop crane conforms to CE standards and all are 125% overload tested before delivery. They are fitted with a relief valve to prevent overload.
There are three types with the following capaities:
Model Capacity at Position (kg)
P1 P2 P3
SC500 500 425 350
SC1000 1000 800 700
SC2000 2000 1700 1500
This is a small selection of our jacking and lifting equipment, please give us a call to discuss your requirements.
Call us on 07917 831283 for our professional friendly advice
Mark Eddles trading as Hampshire Lifting Gear